SQLITE_TABLE(5)                                                SQLITE_TABLE(5)

NAME
       sqlite_table - Postfix SQLite configuration

SYNOPSIS
       postmap -q "string" sqlite:/etc/postfix/filename

       postmap -q - sqlite:/etc/postfix/filename <inputfile

DESCRIPTION
       The  Postfix  mail system uses optional tables for address rewriting or
       mail routing. These tables are usually in dbm or db format.

       Alternatively, lookup tables can be specified as SQLite databases.   In
       order  to use SQLite lookups, define an SQLite source as a lookup table
       in main.cf, for example:
           alias_maps = sqlite:/etc/postfix/sqlite-aliases.cf

       The file /etc/postfix/sqlite-aliases.cf has  the  same  format  as  the
       Postfix main.cf file, and can specify the parameters described below.

LIST MEMBERSHIP
       When  using  SQL  to  store  lists such as $mynetworks, $mydestination,
       $relay_domains, $local_recipient_maps, etc., it is important to  under-
       stand that the table must store each list member as a separate key. The
       table lookup verifies the *existence* of the key.  See  "Postfix  lists
       versus tables" in the DATABASE_README document for a discussion.

       Do  NOT create tables that return the full list of domains in $mydesti-
       nation or $relay_domains etc., or IP addresses in $mynetworks.

       DO create tables with each matching item as a key and with an arbitrary
       value.  With  SQL databases it is not uncommon to return the key itself
       or a constant value.

SQLITE PARAMETERS
       dbpath The SQLite database file location. Example:
                  dbpath = customer_database

       query  The SQL query template used to search the database, where %s  is
              a  substitute for the address Postfix is trying to resolve, e.g.
                  query = SELECT replacement FROM aliases WHERE mailbox = '%s'

              This parameter supports the following '%' expansions:

              %%     This is replaced by a literal '%' character.

              %s     This is replaced by the input key.  SQL quoting  is  used
                     to  make  sure that the input key does not add unexpected
                     metacharacters.

              %u     When the input key is an address of the form user@domain,
                     %u  is  replaced  by  the  SQL  quoted  local part of the
                     address.  Otherwise, %u is replaced by the entire  search
                     string.   If  the  localpart  is empty, the query is sup-
                     pressed and returns no results.

              %d     When the input key is an address of the form user@domain,
                     %d  is  replaced  by  the  SQL  quoted domain part of the
                     address.  Otherwise, the query is suppressed and  returns
                     no results.

              %[SUD] The upper-case equivalents of the above expansions behave
                     in the query parameter identically  to  their  lower-case
                     counter-parts.   With  the  result_format  parameter (see
                     below), they expand the input key rather than the  result
                     value.

              %[1-9] The  patterns  %1,  %2, ... %9 are replaced by the corre-
                     sponding most significant component of  the  input  key's
                     domain.  If  the input key is user@mail.example.com, then
                     %1 is com, %2 is example and %3 is mail. If the input key
                     is  unqualified or does not have enough domain components
                     to satisfy all the specified patterns, the query is  sup-
                     pressed and returns no results.

              The  domain  parameter  described below limits the input keys to
              addresses in matching domains.  When  the  domain  parameter  is
              non-empty, SQL queries for unqualified addresses or addresses in
              non-matching domains are suppressed and return no results.

              This parameter is available with Postfix 2.2. In prior  releases
              the   SQL   query   was  built  from  the  separate  parameters:
              select_field, table, where_field and additional_conditions.  The
              mapping from the old parameters to the equivalent query is:

                  SELECT [select_field]
                  FROM [table]
                  WHERE [where_field] = '%s'
                        [additional_conditions]

              The  '%s'  in  the  WHERE  clause  expands to the escaped search
              string.  With Postfix 2.2 these legacy parameters  are  used  if
              the query parameter is not specified.

              NOTE: DO NOT put quotes around the query parameter.

       result_format (default: %s)
              Format template applied to result attributes. Most commonly used
              to append (or prepend) text to the result. This  parameter  sup-
              ports the following '%' expansions:

              %%     This is replaced by a literal '%' character.

              %s     This  is  replaced  by the value of the result attribute.
                     When result is empty it is skipped.

              %u     When the result attribute value is an address of the form
                     user@domain,  %u  is  replaced  by  the local part of the
                     address. When the result has an  empty  localpart  it  is
                     skipped.

              %d     When  a  result attribute value is an address of the form
                     user@domain, %d is replaced by the  domain  part  of  the
                     attribute  value.  When  the  result is unqualified it is
                     skipped.

              %[SUD1-9]
                     The upper-case and decimal digit  expansions  interpolate
                     the  parts of the input key rather than the result. Their
                     behavior is identical to that described with  query,  and
                     in  fact  because  the  input  key  is  known in advance,
                     queries whose key does not contain  all  the  information
                     specified  in  the  result  template  are  suppressed and
                     return no results.

              For example, using "result_format = smtp:[%s]" allows one to use
              a mailHost attribute as the basis of a transport(5) table. After
              applying the result format, multiple values are concatenated  as
              comma  separated  strings.  The  expansion_limit  and  parameter
              explained below allows one to restrict the number of  values  in
              the result, which is especially useful for maps that must return
              at most one value.

              The default value %s specifies that each result value should  be
              used as is.

              This parameter is available with Postfix 2.2 and later.

              NOTE: DO NOT put quotes around the result format!

       domain (default: no domain list)
              This  is a list of domain names, paths to files, or "type:table"
              databases. When specified, only fully qualified search keys with
              a  *non-empty*  localpart and a matching domain are eligible for
              lookup:  'user'  lookups,  bare  domain  lookups  and  "@domain"
              lookups  are  not  performed.  This can significantly reduce the
              query load on the SQLite server.
                  domain = postfix.org, hash:/etc/postfix/searchdomains

              It is best not to use SQL to store the domains eligible for  SQL
              lookups.

              This parameter is available with Postfix 2.2 and later.

              NOTE: DO NOT define this parameter for local(8) aliases, because
              the input keys are always unqualified.

       expansion_limit (default: 0)
              A limit on the total number of result elements  returned  (as  a
              comma separated list) by a lookup against the map.  A setting of
              zero disables the limit. Lookups fail with a temporary error  if
              the  limit  is  exceeded.   Setting  the limit to 1 ensures that
              lookups do not return multiple values.

OBSOLETE MAIN.CF PARAMETERS
       For compatibility with other Postfix lookup tables,  SQLite  parameters
       can also be defined in main.cf.  In order to do that, specify as SQLite
       source a name that doesn't begin with a slash or  a  dot.   The  SQLite
       parameters  will then be accessible as the name you've given the source
       in its definition, an underscore, and the name of the  parameter.   For
       example,  if the map is specified as "sqlite:sqlitename", the parameter
       "query" would be defined in main.cf as "sqlitename_query".

OBSOLETE QUERY INTERFACE
       This section describes an interface that is deprecated  as  of  Postfix
       2.2.  It  is  replaced  by  the  more general query interface described
       above.  If the  query  parameter  is  defined,  the  legacy  parameters
       described  here  ignored.   Please  migrate to the new interface as the
       legacy interface may be removed in a future release.

       The following parameters can be used  to  fill  in  a  SELECT  template
       statement of the form:

           SELECT [select_field]
           FROM [table]
           WHERE [where_field] = '%s'
                 [additional_conditions]

       The specifier %s is replaced by the search string, and is escaped so if
       it contains single quotes or other odd characters, it will not cause  a
       parse error, or worse, a security problem.

       select_field
              The SQL "select" parameter. Example:
                  select_field = forw_addr

       table  The SQL "select .. from" table name. Example:
                  table = mxaliases

       where_field
              The SQL "select .. where" parameter. Example:
                  where_field = alias

       additional_conditions
              Additional conditions to the SQL query. Example:
                  additional_conditions = AND status = 'paid'

SEE ALSO
       postmap(1), Postfix lookup table maintenance
       postconf(5), configuration parameters
       ldap_table(5), LDAP lookup tables
       mysql_table(5), MySQL lookup tables
       pgsql_table(5), PostgreSQL lookup tables

README FILES
       DATABASE_README, Postfix lookup table overview
       SQLITE_README, Postfix SQLITE howto

LICENSE
       The Secure Mailer license must be distributed with this software.

HISTORY
       SQLite support was introduced with Postfix version 2.8.

AUTHOR(S)
       Original implementation by:
       Axel Steiner

                                                               SQLITE_TABLE(5)